Order Management Rules (OMR) Available Conditions [Information]
Last updated: October 26, 2026
This article documents the built-in evaluation fields available within the Condition builder in techSHIP and explains how registered Location Custom Fields appear for your current Location.
This article covers the data points that the techSHIP rule engine can evaluate across all available levels, including dynamically registered Location Custom Fields.
To learn how to build and configure an OMR, refer to 📄 What's New in Order Management Rules (OMR) for Rule Sets in techSHIP [Guide].
As a best practice, always ensure your active evaluation level matches the category of the Condition you select.
While all Conditions remain selectable in the Field drop-down regardless of your current loop level, a level mismatch can cause unexpected behavior:
Evaluating upwards: If you are inside a Line loop and select an Order Condition, such as State, techSHIP correctly evaluates the overall Order header data.
Evaluating downwards: When you select a Line field at the Order or Package level, supported aggregate operators evaluate distinct values across the relevant Lines. Use a Line loop when you need to evaluate a specific item's value.
Location Custom Fields in Conditions
Registered Location Custom Fields for your current Location can appear directly in the Field selector when you configure a Condition. You can select both customer-managed fields and fields declared by the assigned Host System.
Because registration is Location-specific, the custom fields available to you can differ between Locations. The static Order Level, Package Level, and Line Level tables in this article therefore list built-in fields only and do not attempt to enumerate your Location-specific fields.
The Field selector displays customfields: followed by the field's Display Name, while the rule retains the underlying Code as its reference. For information about creating, typing, and managing these definitions, refer to 📄 Managing Location Custom Fields [Guide].
Operators by Type
The Type assigned to a registered Location Custom Field determines which comparison operators you can select.
Type | Operators Available in Conditions |
|---|---|
Number | Equals, Not equals, Greater, Greater or equal, Lower, Lower or equal |
String or a legacy field without an explicit Type | Equals, Not equals, Like, Not like, Match regex, Not match regex, In, Not in, In list, Not in list |
For a Number field, Greater, Greater or equal, Lower, and Lower or equal parse the stored value as a decimal before comparison. Missing, empty, or nonnumeric values do not satisfy these numeric ordering comparisons.
Equals and Not equals remain text comparisons even when the field Type is Number. As a result, textual representations such as 12.50 and 12.5 are not necessarily equal.
How Level Affects the Value Evaluated
When you select a registered Location Custom Field, the selected Level determines which stored value techSHIP evaluates.
Level | Value Evaluated |
|---|---|
Order | The Order additional-data value for the selected field. |
Package | The same Order additional-data value because registered Location Custom Fields do not have a separate Package-level value store. |
Line | The current Line additional-data value for the selected field. |
When you select a registered Location Custom Field directly in a Condition, techSHIP reads its current value, including a value written earlier in the same rule flow. For an ordinary comparison after an earlier write, select the registered field directly instead of recreating the comparison with a raw WmsData expression, which can follow different snapshot behavior. For more information on how these expressions work, see: 📄 Using Custom Variables and Expressions in OMR [Information].
Order Level
When you build rules at the Order level, techSHIP evaluates Conditions against the primary header data of the shipment.
Conditions ending with (AI) use artificial intelligence to parse and extract specific data components. Because this extraction is automated, it may not always be completely accurate. Thoroughly test your rules when you use these fields.
Ship From Field Resolution: When you evaluate Ship From Conditions, such as Ship from name or Ship from city, techSHIP evaluates the effective address rather than only the raw data entered directly on the Order. The application resolves this address using the following precedence: Return-address override → Shipper override (or Order's shipper) → Order Ship From address → Client sender override → Induction-point address → Carrier default configuration.
The Has ship from address Condition behaves differently. It evaluates strictly from the raw Order-level flag and may return false even when other Ship From fields successfully resolve values from Client or Carrier defaults.
When a Condition supports a Custom List comparison, you can evaluate the field against a reusable set of values maintained in techSHIP. For details about list scope, availability, updates, and Condition evaluation, refer to 📄 Understanding Custom Lists [Information].
Field | Description |
|---|---|
Country | The destination country of the Order. |
Postal | The destination postal code assigned to the Order. You can use a Custom List with this field to evaluate destination coverage for Carrier serviceability. For the complete configuration, refer to 📄 Setting up Order Management Rules: Carrier Serviceability with Custom Lists [Guide]. |
Postal (as number) | The destination postal code converted to a numeric format for numerical comparisons. |
State | The destination state or province of the Order. |
Ship-to name | The assigned name of the Recipient. |
Ship-to company | The assigned company name of the Recipient. |
Ship-to address 1 | Line 1 of the destination Address. |
Ship-to address 2 | Line 2 of the destination Address. |
Ship-to address 3 | Line 3 of the destination Address. |
Ship-to city | The destination city of the Order. |
Ship-to email | The email address of the Recipient. |
Ship-to phone | The phone number of the Recipient. |
Ship-to street name (AI) | The destination street name extracted through AI parsing. |
Ship-to street number (AI) | The destination street number extracted through AI parsing. |
Ship-to unit (AI) | The destination unit or apartment extracted through AI parsing. |
Ship-to latitude | The geocoded latitude of the Destination. |
Ship-to longitude | The geocoded longitude of the Destination. |
Ship-from latitude | The geocoded latitude of the Origin. |
Ship-from longitude | The geocoded longitude of the Origin. |
Has bill-to address | A Boolean flag indicating whether a Bill-to address exists. |
Bill-to name | The name associated with the Bill-to details. |
Bill-to company | The company name associated with the Bill-to details. |
Bill-to address 1 | Line 1 of the Bill-to address. |
Bill-to address 2 | Line 2 of the Bill-to address. |
Bill-to address 3 | Line 3 of the Bill-to address. |
Bill-to email | The email address associated with the Bill-to details. |
Bill-to phone | The phone number associated with the Bill-to details. |
Bill-to city | The city associated with the Bill-to details. |
Bill-to state | The state or province associated with the Bill-to details. |
Bill-to postal | The postal code associated with the Bill-to details. |
Bill-to country | The country associated with the Bill-to details. |
Has ship from address | A Boolean flag indicating whether a Ship-from address exists. |
Ship from name | The name associated with the Origin. |
Ship from company | The company name associated with the Origin. |
Ship from address 1 | Line 1 of the Origin address. |
Ship from address 2 | Line 2 of the Origin address. |
Ship from address 3 | Line 3 of the Origin address. |
Ship from email | The email address associated with the Origin. |
Ship from phone | The phone number associated with the Origin. |
Ship from city | The city associated with the Origin. |
Ship from state | The state or province associated with the Origin. |
Ship from postal | The postal code associated with the Origin. |
Ship from country | The country associated with the Origin. |
Has importer address | A Boolean flag indicating whether an Importer address exists. |
Importer name | The name of the Importer. |
Importer company | The company name of the Importer. |
Importer address 1 | Line 1 of the Importer address. |
Importer address 2 | Line 2 of the Importer address. |
Importer address 3 | Line 3 of the Importer address. |
Importer email | The email address of the Importer. |
Importer phone | The phone number of the Importer. |
Importer city | The city of the Importer. |
Importer state | The state or province of the Importer. |
Importer postal | The postal code of the Importer. |
Importer country | The country of the Importer. |
Importer account number | The specific account number of the Importer. |
Has exporter address | A Boolean flag indicating whether an Exporter address exists. |
Exporter name | The name of the Exporter. |
Exporter company | The company name of the Exporter. |
Exporter address 1 | Line 1 of the Exporter address. |
Exporter address 2 | Line 2 of the Exporter address. |
Exporter address 3 | Line 3 of the Exporter address. |
Exporter email | The email address of the Exporter. |
Exporter phone | The phone number of the Exporter. |
Exporter city | The city of the Exporter. |
Exporter state | The state or province of the Exporter. |
Exporter postal | The postal code of the Exporter. |
Exporter country | The country of the Exporter. |
Has return address | A Boolean flag indicating whether a Return address exists. |
Return name | The name associated with the Return. |
Return company | The company name associated with the Return. |
Return address 1 | Line 1 of the Return address. |
Return address 2 | Line 2 of the Return address. |
Return address 3 | Line 3 of the Return address. |
Return email | The email address associated with the Return. |
Return phone | The phone number associated with the Return. |
Return city | The city associated with the Return. |
Return state | The state or province associated with the Return. |
Return postal | The postal code associated with the Return. |
Return country | The country associated with the Return. |
Terms | The billing terms assigned to the Order. |
Shipper type | Evaluates the shipper classification assigned to the Order. Use Equals or Not equals to compare it with Business, Direct consumer, Government, Private, Reseller, or Other. For configuration examples, refer to 📄 Setting up Order Management Rules: EU Product Identifiers and B2B Classification [Guide]. |
Receiver type | Evaluates the receiver classification assigned to the Order. Use Equals or Not equals to compare it with Business, Direct consumer, Government, Private, Reseller, or Other. Selecting Business does not independently establish a B2B exemption. For configuration examples, refer to 📄 Setting up Order Management Rules: EU Product Identifiers and B2B Classification [Guide]. |
Import source | The origin system or source from which the Order was imported. |
Ancillary endorsement | The configured ancillary endorsement for the Order. |
Return reason | The predefined reason code for the Return. |
Return reason (other) | The free-text reason provided for the Return. |
Dangerous goods class | The classification category for Dangerous Goods. |
Dangerous goods mode | The transportation mode specified for Dangerous Goods. |
Recipient tax number | The tax identification number of the Recipient. |
Sender tax number | The tax identification number of the Sender. |
Exporter tax number | The tax identification number of the Exporter. |
Importer tax number | The tax identification number of the Importer. |
Bill-to tax number | The tax identification number for the Bill-to account. |
Recipient EORI number | The EORI number of the Recipient. |
Sender EORI number | The EORI number of the Sender. |
Exporter EORI number | The EORI number of the Exporter. |
Importer EORI number | The EORI number of the Importer. |
Bill-to EORI number | The EORI number for the Bill-to account. |
Sender IOSS number | The IOSS number of the Sender. |
Bill-to IOSS number | The IOSS number for the Bill-to account. |
Instruction | The specific instruction string assigned to the Order. |
Order type | The operational type classification of the Order. |
Current day of week | The current day of the week evaluated against the Location's Timezone. |
Current day of month | The current day of the month evaluated against the Location's Timezone. |
Current time of day | The current time evaluated against the Location's Timezone. |
Order total weight (KG) | The cumulative weight of all Packages in the Order, measured in KG. |
Order total weight (LB) | The cumulative weight of all Packages in the Order, measured in LB. |
Max box weight (KG) | The weight of the heaviest single Package in the Order, measured in KG. |
Max box weight (LB) | The weight of the heaviest single Package in the Order, measured in LB. |
Min box weight (KG) | The weight of the lightest single Package in the Order, measured in KG. |
Min box weight (LB) | The weight of the lightest single Package in the Order, measured in LB. |
Order total volume (CU IN) | The cumulative volume of all Packages in the Order, measured in cubic inches. |
Order total volume (CCM) | The cumulative volume of all Packages in the Order, measured in cubic centimeters. |
Max volume (CU IN) | The largest volume of a single Package in the Order, measured in cubic inches. |
Max volume (CCM) | The largest volume of a single Package in the Order, measured in cubic centimeters. |
Min volume (CU IN) | The smallest volume of a single Package in the Order, measured in cubic inches. |
Min volume (CCM) | The smallest volume of a single Package in the Order, measured in cubic centimeters. |
Max length (IN) | The largest length dimension among the Packages, measured in inches. |
Max length (CM) | The largest length dimension among the Packages, measured in centimeters. |
Min length (IN) | The smallest length dimension among the Packages, measured in inches. |
Min length (CM) | The smallest length dimension among the Packages, measured in centimeters. |
Max width (IN) | The largest width dimension among the Packages, measured in inches. |
Max width (CM) | The largest width dimension among the Packages, measured in centimeters. |
Min width (IN) | The smallest width dimension among the Packages, measured in inches. |
Min width (CM) | The smallest width dimension among the Packages, measured in centimeters. |
Max height (IN) | The largest height dimension among the Packages, measured in inches. |
Max height (CM) | The largest height dimension among the Packages, measured in centimeters. |
Min height (IN) | The smallest height dimension among the Packages, measured in inches. |
Min height (CM) | The smallest height dimension among the Packages, measured in centimeters. |
Package count | The total quantity of Packages within the Order. |
Max girth (IN) | The largest girth dimension among the Packages, measured in inches. |
Max girth (CM) | The largest girth dimension among the Packages, measured in centimeters. |
Max length plus girth (IN) | The largest combined length and girth among the Packages, measured in inches. |
Max length plus girth (CM) | The largest combined length and girth among the Packages, measured in centimeters. |
Rate shopping group | The assigned rate shopping group for the Order. |
Residential flag | A Boolean flag indicating whether the destination is marked as Residential. |
Insurance flag | A Boolean flag indicating whether Insurance is applied to the Order. |
Declared value (total) | The total monetary Declared value of the Order. |
Declared value type | The type or categorization of the Declared value. |
Signature flag | A Boolean flag indicating whether a standard Signature is required. |
Hold at location flag | A Boolean flag indicating whether Hold at location is requested. |
Origin signature not required | A Boolean flag indicating whether an Origin signature is bypassed. |
Adult signature flag | A Boolean flag indicating whether an Adult signature is required. |
Indirect signature flag | A Boolean flag indicating whether an Indirect signature is acceptable. |
Dangerous goods flag | A Boolean flag indicating whether the Order contains Dangerous Goods. |
Saturday delivery flag | A Boolean flag indicating whether Saturday delivery is requested. |
Saturday pickup flag | A Boolean flag indicating whether a Saturday pickup is requested. |
Lift gate for pickup | A Boolean flag indicating whether a lift gate is needed for Pickup. |
Lift gate for delivery | A Boolean flag indicating whether a lift gate is needed for Delivery. |
Request pickup | A Boolean flag indicating whether a Pickup request is active. |
Service code | The specific Service code selected or processed for the Order. |
Carrier code | The code of the Carrier currently assigned to the Order. This Condition evaluates independently from Carrier ID and can change after rate shopping, a Rule Set Carrier Action, or a manual Carrier edit. |
Carrier ID | The internal system identifier of the Carrier currently assigned to the Order. This Condition evaluates independently from Carrier code and reflects the currently assigned Carrier. |
Import carrier code | The Carrier code recorded when the Order was imported. Unlike Carrier code and Carrier ID, this value remains unchanged if the current Carrier is later changed through rate shopping, a Rule Set Carrier Action, or a manual edit. Use |
Original WMS carrier code | The raw Carrier or ship-via value received from the source Host System. Use this Condition when you need to evaluate the original inbound Carrier value rather than a techSHIP Carrier code. |
Original WMS service code | The raw Service value received from the source Host System. Use this Condition when you need to evaluate the original inbound Service value. |
Billing account client name | The name of the specific Billing account client associated with the Order. |
Processing user | The specific account that processed the Order. This Condition matches the stored string on the Order; while that value is typically formatted as an email address, it depends on the exact username format stored in your Techdinamics setup. |
Client code | The unique code of the Client associated with the Order. For details about how Client evaluation interacts with Rule Set assignments and exclusion modes, refer to 📄 What's New in Order Management Rules (OMR) for Rule Sets in techSHIP [Guide]. |
Freight billing account | The account number used for Freight billing. |
Freight billing country | The country associated with the Freight billing account. |
Freight billing postal | The postal code associated with the Freight billing account. |
Freight billing terms | The specific terms associated with Freight billing. |
Duty payment account | The account number used for Duty payments. |
Duty payment country | The country associated with the Duty payment account. |
Duty payment postal | The postal code associated with the Duty payment account. |
Duty payment terms | The specific terms associated with Duty payments. |
Freight class | The general freight class of the Order. |
Freight NMFC class | The specific NMFC classification of the Freight. |
Published rate total | The total public or published rate for the Shipment. |
Freight Charge Before Tax | The total freight charge calculated before Taxes. |
Total Freight Charge | The final total freight charge of the Order. |
Package Level
When you validate within a Package loop and use a Package-level Condition, techSHIP evaluates the physical or financial attributes of the individual shipment box.
Field | Description |
|---|---|
Total value | The calculated sum of unit price multiplied by quantity for the current Package. |
Package total weight (LB) | The total physical weight of the current Package, measured in LB. |
Package total weight (KG) | The total physical weight of the current Package, measured in KG. |
Package net weight (LB) | The net physical weight of the current Package, measured in LB. |
Package net weight (KG) | The net physical weight of the current Package, measured in KG. |
Billable weight (calculate, LBS) | The calculated billable weight of the Package using the configured dimensional divisor, in LBS. |
Package volume (CU IN) | The total volume of the current Package, measured in cubic inches. |
Package volume (CCM) | The total volume of the current Package, measured in cubic centimeters. |
Max dim (IN) | The largest single dimension of the current Package, measured in inches. |
Max dim (CM) | The largest single dimension of the current Package, measured in centimeters. |
Min dim (IN) | The smallest single dimension of the current Package, measured in inches. |
Min dim (CM) | The smallest single dimension of the current Package, measured in centimeters. |
Box Name | The specific name or description of the physical box or Package used for the shipment. |
Box length (IN) | The specific length of the current Package, measured in inches. |
Box length (CM) | The specific length of the current Package, measured in centimeters. |
Box width (IN) | The specific width of the current Package, measured in inches. |
Box width (CM) | The specific width of the current Package, measured in centimeters. |
Box height (IN) | The specific height of the current Package, measured in inches. |
Box height (CM) | The specific height of the current Package, measured in centimeters. |
Girth (IN) | The calculated girth of the current Package, measured in inches. |
Girth (CM) | The calculated girth of the current Package, measured in centimeters. |
Length plus girth (IN) | The combined length and girth of the current Package, measured in inches. |
Length plus girth (CM) | The combined length and girth of the current Package, measured in centimeters. |
Dry ice weight in package | The recorded weight of dry ice within the current Package. |
Line Level
When you iterate within a Line loop and use a Line-level Condition, techSHIP evaluates the individual product Lines or SKUs associated with the Order.
Field | Description |
|---|---|
SKU | The specific stock keeping unit code of the Line item. |
UPC | Evaluates the standardized product identifier stored on the current Line, including UPC, EAN, GTIN, or ISBN values. Use Equals with an empty comparison value to identify a missing identifier, Not equals with an empty value to identify a populated identifier, or Like with a wildcard pattern (for example, At the Order or Package level, supported aggregate operators evaluate the distinct identifier values across the relevant Lines. For conditional identifier-population examples, refer to 📄 Setting up Order Management Rules: EU Product Identifiers and B2B Classification [Guide]. |
Manufacturer product identifier | Evaluates the manufacturer-assigned model, part, or style identifier stored on the current Line. Use Equals with an empty comparison value to identify a missing identifier, Not equals with an empty value to identify a populated identifier, or Like with a wildcard pattern (for example, At the Order or Package level, supported aggregate operators evaluate the distinct identifier values across the relevant Lines. For conditional identifier-population examples, refer to 📄 Setting up Order Management Rules: EU Product Identifiers and B2B Classification [Guide]. |
SKU Description | The text description of the SKU. |
Item quantity | The physical quantity of the Line item. |
SKU Classification | The assigned classification category of the SKU. |
Cartonization Handling Group | Evaluates the Handling Group assigned to the current Line. Select an available Handling Group, or select Ungrouped to match a Line with no Handling Group assignment. For configuration instructions, refer to 📄 Setting up Order Management Rules: Assigning Handling Groups for Cartonization [Guide]. For detailed conceptual information and advanced configuration, refer to 📄 How to Use Cartonization [Guide]. |
Country of origin | The designated country of origin for the Line item. |
SKU Unit Price | The individual unit price of the SKU. |
SKU dangerous goods code | The specific dangerous goods code assigned to the Line item. |