How to configure A&B (ANB) in techSHIP [Guide]
Last updated: November 13, 2026
This guide explains how to add and configure this carrier connection, review its available carrier-specific settings, and understand the shipment requirements and operational constraints that apply.
Carrier Requirements and Specifications
This section summarizes onboarding requirements and lists confirmed carrier-specific constraints.
To review all supported carriers and their specific requirements, see: 📄 techSHIP supported Carriers - Master List [Guides List].
Onboarding Requirements
The A&B integration supports:
Void
Rate Shop
Tracking History, through techTRACK
Collect (COD)
Time in Transit
Label References
Signature Required
Information to be Provided
The following credentials and data points are mandatory to connect to A&B. Ensure you have these items available before starting the setup:
DATA ELEMENT | SOURCE (HOW TO OBTAIN) |
|---|---|
API access key | Obtain the key from your A&B representative. |
Client ID | Obtain the numeric account identifier from your A&B representative. |
Pickup availability and preparation time | Confirm the warehouse's pickup opening and closing times and the preparation time required before a shipment is ready. |
Induction address | Obtain the warehouse address from which A&B will collect shipments. |
Specifications and Constraints
Operational Details
A&B offers courier, Less-than-Truckload (LTL), and Full Truckload (FTL) services. The integration includes Canadian and US service options; confirm service availability for your account and shipment lane with A&B.
Bill of Lading (BOL): For LTL and FTL services, the carrier-returned shipping document is made available as the BOL. Configure the required document output at the Baseline Account before processing shipments.
Pickup readiness and appointments: Ship date/time identifies when the shipment is ready for pickup. Entering a value does not request a fixed pickup appointment. When a fixed appointment is required, enable Set pickup appointment time and enter Pickup appointment date/time separately. A fixed appointment can affect carrier service availability and pricing.
Pickup availability: Use pickup times accepted by A&B. An explicitly entered readiness time is sent to the carrier without being moved into office hours. If the shipment date has no time of day, techSHIP uses the Baseline Account's configured Ready time for pickup readiness.
Shipment addresses: Provide a contact name, street address, city, postal code, and country for both pickup and delivery.
Configuring a Baseline Account
A Baseline Account serves as the fundamental connection point between techSHIP and the carrier's system. It acts as a template that holds the credentials and fundamental properties required to process shipments.
The techSHIP AI Assistant is available from the Carrier page for supported Carrier configuration tasks. For detailed conceptual information and advanced configuration, refer to 📄 techSHIP AI Assistant: Overview & Availability [Information].
Adding a Carrier
Before adding an account, you must ensure the Carrier entity is available for your location.
Click My Carriers from the left menu under the Carriers category.
Click Add Carrier.

Select the desired Carrier.
You may encounter additional messages depending on the carrier status or your plan:
Subscription Required (⭐): If the carrier has a star icon, you will see a message stating "To use this carrier, a subscription upgrade is required." Press Contact to Upgrade to proceed.

Carrier Suspended: If the carrier has not been used for an extended period, you will see a message stating “This carrier is currently on hold...” Click Request Assistance to reactivate it.

Setup Fee Waived: If a carrier from the same carrier group is already installed in your location, you can add this carrier without incurring additional fees.

If needed, update the carrier Name.
Click Add Carrier.

If the purchase confirmation appears, complete the following steps:
Review the purchase notice and any applicable charge information.
Optionally enter a PO Number.
Select I am authorized to complete this purchase on behalf of my organization.
Click Purchase to confirm the Carrier addition.

Once the Carrier is added, you will be automatically redirected to the Carrier page to continue setting it up.
Enter the Code of the Carrier as it appears in your host system.
The Code of the Carrier must match exactly the value defined in the host system. Any discrepancy (including casing or extra spaces) may prevent the carrier from working correctly.
Click Save.

If your facility utilizes the centralized Pickup Schedule, we highly recommend adding this new carrier to your calendar now. While not required to process labels, this ensures accurate induction metrics for your Insights dashboards. To learn more, see 📄 Understanding the Centralized Pickup Schedule & Expected Induction Logic [Information].
Adding a Baseline Account
From the Carrier page, click Add Account to create a new Baseline Account.

You will be redirected to the Baseline Account page to complete the setup.
Entering incorrect values will prevent the system from generating shipping labels.
General Tab
In the General tab, define the administrative properties:

Name: Enter a descriptive name for the account.
Enter a descriptive name based on unique properties. E.g.:
Carrier Name - Account Number (CarrierX - 123456789)
Carrier Name - Consolidator Name (CarrierY - MyConsolidator)
Carrier Name
Usage: Select the most suitable option:
Test: Used for sandbox or onboarding purposes.
Production: Used for live shipping.
Keep the Status field set to its default Active value. An account must be Active to remain fully editable. For detailed conceptual information on account statuses, refer to 📄 How to Inactivate and Activate a Carrier Baseline Account [Step-by-Step Guide].
Carrier Tab
Configure the following settings in the Baseline Account.
A&B Credentials
Access key: Enter the API access key provided by A&B.
Client ID: Enter the account identifier provided by A&B. It must be a positive integer.
Pickup Settings
The following scheduling fields apply when pickup scheduling is configured per carrier. Portals using centralized pickup scheduling manage these scheduling settings separately.
Ready time: Enter the earliest time shipments are available for pickup. This value also supplies the pickup-ready time when a shipment date contains no time of day.
Pickup close: Enter the latest time the warehouse is available for pickup.
Pickup ready hours: Enter the preparation interval in hours. When calculating pickup readiness from the current time, techSHIP adds this interval and adjusts the result for the pickup opening and closing times and weekend settings.
Weekends mode: Select the weekend availability that matches warehouse operations.
Pickup instructions: Enter any instructions that A&B needs when collecting shipments.
Sender Address
Complete the Sender address section with the warehouse induction address and pickup contact information.
Labels Tab
Formats: A&B returns shipping labels and documents in PDF.
Configure Mode for PDF output. Supported output dimensions are 4 × 6 inches and 8.5 × 11 inches.
Document layout: For 8.5 × 11-inch output, configure Waybill Type in the Baseline Account's Carrier tab to request the required layout, such as BOL or Waybill. This setting is available when the account uses the 8.5 × 11-inch size.
Finalizing the Setup
Once you have entered the required information, click Save.

After you save the Baseline Account, check whether the Registration tab or a registration status badge is available.

If neither is available, the Carrier does not use this Registration workflow in techSHIP. If registration is still pending, open the Registration tab and press Registration, then complete 📄 How to Register a Carrier Baseline Account [Step-by-Step Guide] before creating shipments.
From the Carrier page, you can now see the Baseline Account listed with the administrative status Active. The Active status is separate from the account's registration status.

The Baseline Account configuration is now saved. You can continue with Configuring a Client Account below to assign the Baseline Account to a specific Client.
Configuring a Client Account
Adding an Account
Before adding a Client Account, ensure that the Client has been created. For instructions creating a Client, see: 📄 10 - How to create a Client profile [Step-by-Step guide].
Click Clients from the left menu under the Clients section.
Click the Edit icon for the desired Client.

Click Add Accounts.

Optionally, use the Search box to search by Baseline Account Name or Carrier.
Select the Baseline Accounts that will serve as the foundation for your new Client Accounts.
Click Add Accounts.

A toast notification will confirm the accounts were successfully assigned. Click the Refresh icon if recently added accounts are not displayed.

Click Edit on each newly created account.

Configure the available options in each tab (except Carrier).

For complete instructions on configuring this settings, see 📄 How to configure the Billing Account General Options tab [Step-by-Step guide].
Carrier Tab
Configure the following client-specific settings in the Client Account.
Service and Package Settings
Service code: Select the service to use for the client's shipments, or retain the service supplied with the order. Use the rate-shopping option when the account should select the lowest-priced available service.
Package type: Select the package type that matches the client's shipments.
Vehicle type: Select a vehicle when the shipment requires a specific type. If left unset, A&B calculates the vehicle type from the package information.
Caller: Enter the caller information to send to A&B with shipment bookings, when applicable.
Sender and Contact Information
Override sender address: Enable this option when the client ships from a different pickup address, and complete the client's sender address.
Contact Email: Enter the client's contact email to send with shipment bookings.
Contact phone: Enter the client's contact phone number to send with shipment bookings.
Specifying Rate Shopping Service Codes
When using Rate Shop, you can restrict which services are included or excluded from consideration.
For detailed instructions on how to configure this, see: Include or exclude Service Codes when Rate Shopping [Step-by-Step Guide].
Label References
A&B supports one shipment reference, configured through Reference 1 in the Client Account's General tab, under Labels.
Only Reference 1 is sent to A&B. The other generic reference fields do not add further references to this integration.
For a comprehensive guide on how to use label references, see: Using order References in your labels [Step-by-Step guide].
Finalizing the Setup
Once you have entered the required information, click Save.

With the account configured and requirements verified, you can now proceed to process orders as described below.
Configuring an Order
The steps described in this section are not required for carrier setup, and they are offered as an optional review if further order-level configuration is required.
Follow the UI Navigation steps in 📄 05 - How to edit an order’s information - [Step-by-Step guide], using the carrier-specific values provided in this guide.
Carrier Tab
Configure shipment-specific settings in the order's Carrier tab, under Options.
Pickup and Delivery Appointments
Ship date/time: Enter the date and time when the shipment will be ready for pickup. This controls pickup readiness and does not, by itself, request a fixed pickup appointment. If the entered value contains a date but no time of day, techSHIP uses the Baseline Account's Ready time for the readiness time.
Set pickup appointment time: Enable this option only when the carrier must arrive at a specific appointment time.
Pickup appointment date/time: After enabling Set pickup appointment time, enter the complete fixed pickup appointment date and time. This field is required while the option is enabled.
Set delivery appointment time: Enable this option when a delivery appointment is required.
Delivery appointment date/time: Enter the complete delivery date and time after enabling Set delivery appointment time. The full date and time are sent to A&B.
Pickup readiness and a fixed pickup appointment are independent. Disabling Set pickup appointment time prevents a previously stored appointment date/time from being sent to A&B. A fixed pickup appointment can change the services returned by the carrier and can add an appointment charge.
Set the delivery appointment after the planned pickup. To remove a delivery appointment, disable Set delivery appointment time; a previously stored value is not sent while this option is disabled.
Shipment Options
Collect on delivery amount: Enter the amount to collect when COD applies.
Insurance required: Enable carrier insurance when needed and enter Declared value for the shipment.
Tailgate at pickup and Tailgate at delivery: Enable the required tailgate services.
Inside pickup and Inside delivery: Enable the required inside handling services.
Handbomb at pickup and Handbomb at delivery: Enable the required manual handling services.
Vehicle type: Select a shipment-specific vehicle when it should take precedence over the Client Account's selection.
Click Save to apply the order-level changes. After the Order is updated, continue with the standard shipping workflow.
Troubleshooting
Carrier credentials rejected: Verify Access key and Client ID in the Baseline Account's Carrier tab against the values provided by A&B. The Client ID must be a positive integer.
Office-closed rejection: If A&B returns
Our office is closed and no one may see this request., review Ship date/time on the order and the configured Ready time. Use a pickup readiness time accepted by the carrier. Do not enable Set pickup appointment time unless a fixed appointment is actually required.Pickup appointment is not applied: Enable Set pickup appointment time and provide Pickup appointment date/time. A Ship date/time value alone identifies readiness and does not activate the appointment.
A previously entered pickup appointment should no longer be sent: Disable Set pickup appointment time. The stored appointment value can remain on the order, but techSHIP does not send it while the option is disabled.
Incorrect delivery appointment: Enable Set delivery appointment time and review Delivery appointment date/time on the order. Enter the intended delivery date as well as the time, and verify that it follows the planned pickup.
Vehicle cannot be calculated: Review package dimensions, weight, and Package type. If the carrier cannot calculate a vehicle, select an appropriate Vehicle type in the Client Account or on the order.
Missing shipment reference: Configure Reference 1 in the Client Account's General tab. Additional generic reference fields are not sent to A&B.
BOL appears instead of a parcel label: Confirm the selected service. LTL and FTL services return the carrier document as a BOL; review the Baseline Account's output size and Waybill Type if a different document layout is required.