How to configure ShipEzee (SHIPEZEEV2) in techSHIP [Guide]

Last updated: October 28, 2026

This guide explains how to add and configure this carrier connection, review its available carrier-specific settings, and understand the shipment requirements and operational constraints that apply.

Carrier Requirements and Specifications

This section summarizes onboarding requirements and lists confirmed carrier-specific constraints.

To review all supported carriers and their specific requirements, see: 📄 techSHIP supported Carriers - Master List [Guides List].

Onboarding Requirements

The ShipEzee integration supports:

  • Void

  • Rate Shopping

  • Time in Transit

  • Label References

  • Signature Required

  • Adult Signature Required

  • Insurance

  • Sender Address Override

  • Multi-package Shipments

  • Manifests

Information to be Provided

The following credentials and data points are mandatory to connect to ShipEzee. Ensure you have these items available before starting the setup:

DATA ELEMENT

SOURCE (HOW TO OBTAIN)

Client ID

Obtain from ShipEzee. Enter it in the Baseline Account's Username field.

Client Secret

Obtain from ShipEzee. Enter it in the Baseline Account's Password field.

Account ID

Obtain from ShipEzee for the account being connected.

Sender address

Provide your shipping facility's sender name, company, street address, city, postal code, and country. Include state/province and contact details as applicable.

Confirm with ShipEzee which services and shipping flows are enabled for the account. Different domestic, regional, and international flows may require separate account configurations.

Specifications and Constraints

Operational Details

ShipEzee, the parcel shipping platform of Reliable Logistics, supports Small Parcel shipments, including domestic, regional, and international flows. Available services are Standard, Priority, and Express, subject to account and lane eligibility.

Time in Transit is available when the carrier returns an estimated delivery date.

International customs: Coordinate the required customs documents and account configuration with Reliable Logistics before shipping internationally. The subsequent customs process is handled outside ShipEzee, and Incoterms are managed at the account level.

Manifests: Use the standard manifest finalization workflow to close the associated carrier jobs and obtain their PDF manifests. A manifest created from tracking numbers alone does not provide a downloadable PDF.

Bill of Lading (BOL): This integration does not provide a BOL.

  • Packages: Include at least one package. Each package requires positive weight, length, width, and height. Weight is sent in pounds and dimensions in inches, rounded up to three and two decimal places respectively.

  • Item quantities: Every item quantity must be a whole number greater than zero. Missing, zero, negative, and fractional quantities are rejected.

  • International package contents: Each package must contain at least one item.

  • Sender and destination addresses: City, country, and postal code are required for both rating and processing. Shipment processing also requires the first street-address line for both addresses.

  • Shipment charges: Carrier responses must contain consistent package currencies. Missing or inconsistent currencies prevent the integration from combining package charges.

Configuring a Baseline Account

A Baseline Account serves as the fundamental connection point between techSHIP and the carrier's system. It acts as a template that holds the credentials and fundamental properties required to process shipments.

The techSHIP AI Assistant is available from the Carrier page for supported Carrier configuration tasks. For detailed conceptual information and advanced configuration, refer to 📄 techSHIP AI Assistant: Overview & Availability [Information].

Adding a Carrier

Before adding an account, you must ensure the Carrier entity is available for your location.

  1. Click My Carriers from the left menu under the Carriers category.

  2. Click Add Carrier.

  3. Select the desired Carrier.

You may encounter additional messages depending on the carrier status or your plan:

  • Subscription Required (⭐): If the carrier has a star icon, you will see a message stating "To use this carrier, a subscription upgrade is required." Press Contact to Upgrade to proceed.

  • Carrier Suspended: If the carrier has not been used for an extended period, you will see a message stating “This carrier is currently on hold...” Click Request Assistance to reactivate it.

  • Setup Fee Waived: If a carrier from the same carrier group is already installed in your location, you can add this carrier without incurring additional fees.

  1. If needed, update the carrier Name.

  2. Click Add Carrier.

If the purchase confirmation appears, complete the following steps:

  • Review the purchase notice and any applicable charge information.

  • Optionally enter a PO Number.

  • Select I am authorized to complete this purchase on behalf of my organization.

  • Click Purchase to confirm the Carrier addition.

Preview

Once the Carrier is added, you will be automatically redirected to the Carrier page to continue setting it up.

  1. Enter the Code of the Carrier as it appears in your host system.

The Code of the Carrier must match exactly the value defined in the host system. Any discrepancy (including casing or extra spaces) may prevent the carrier from working correctly.

  1. Click Save.

If your facility utilizes the centralized Pickup Schedule, we highly recommend adding this new carrier to your calendar now. While not required to process labels, this ensures accurate induction metrics for your Insights dashboards. To learn more, see 📄 Understanding the Centralized Pickup Schedule & Expected Induction Logic [Information].

Adding a Baseline Account

From the Carrier page, click Add Account to create a new Baseline Account.

You will be redirected to the Baseline Account page to complete the setup.

Entering incorrect values will prevent the system from generating shipping labels.

General Tab

In the General tab, define the administrative properties:

  • Name: Enter a descriptive name for the account.

Enter a descriptive name based on unique properties. E.g.:

  • Carrier Name - Account Number (CarrierX - 123456789)

  • Carrier Name - Consolidator Name (CarrierY - MyConsolidator)

  • Carrier Name

  • Usage: Select the most suitable option:

    • Test: Used for sandbox or onboarding purposes.

    • Production: Used for live shipping.

Keep the Status field set to its default Active value. An account must be Active to remain fully editable. For detailed conceptual information on account statuses, refer to 📄 How to Inactivate and Activate a Carrier Baseline Account [Step-by-Step Guide].

Carrier Tab

Credentials

  • Username: Enter the Client ID provided by ShipEzee. Required.

  • Password: Enter the Client Secret provided by ShipEzee. Required; the field uses a masked password control.

  • Account ID: Enter the account identifier provided by ShipEzee. Required.

Sender Address

In Sender address, complete Sender name, Sender company, Address 1, City, Zip, and Country. Enter State/province as applicable and use Address 2 when needed.

Optionally complete Phone and Email.

This address is the sender source when the Client Account's Override sender address is disabled and no other applicable shipment-level source takes precedence.

Labels Tab

Set Mode to PDF or ZPL.

Each processed package receives its label from ShipEzee. Select one of these supported formats; PNG is rejected.

Finalizing the Setup

Once you have entered the required information, click Save.

After you save the Baseline Account, check whether the Registration tab or a registration status badge is available.

If neither is available, the Carrier does not use this Registration workflow in techSHIP. If registration is still pending, open the Registration tab and press Registration, then complete 📄 How to Register a Carrier Baseline Account [Step-by-Step Guide] before creating shipments.

From the Carrier page, you can now see the Baseline Account listed with the administrative status Active. The Active status is separate from the account's registration status.

The Baseline Account configuration is now saved. You can continue with Configuring a Client Account below to assign the Baseline Account to a specific Client.

Configuring a Client Account

Adding an Account

Before adding a Client Account, ensure that the Client has been created. For instructions creating a Client, see: 📄 10 - How to create a Client profile [Step-by-Step guide].

  1. Click Clients from the left menu under the Clients section.

  2. Click the Edit icon for the desired Client.

  3. Click Add Accounts.

  4. Optionally, use the Search box to search by Baseline Account Name or Carrier.

  5. Select the Baseline Accounts that will serve as the foundation for your new Client Accounts.

  6. Click Add Accounts.

    A toast notification will confirm the accounts were successfully assigned. Click the Refresh icon if recently added accounts are not displayed.

  1. Click Edit on each newly created account.

  2. Configure the available options in each tab (except Carrier).

For complete instructions on configuring this settings, see 📄 How to configure the Billing Account General Options tab [Step-by-Step guide].

Carrier Tab

Service and Shipment Settings

  • Service code: Select the service to use for this client.

  • Override WMS service code: Enable this option to use the Client Account's selected service instead of the service supplied by the Integrated system.

  • Cost centre: Enter an optional billing reference for charge-backs, up to 30 characters.

  • Reason for export: Enter the default export reason for shipment items, up to 15 characters. The Order's Reason For Export takes precedence.

  • Default currency: Select the fallback currency for item values. An item's own currency takes precedence, followed by the Order's Currency, then this setting.

  • Adult signature required: Set the Client Account's adult-signature preference using Default, Enable, or Disable. Review the Order's Adult signature required setting for the shipment being processed.

Sender Address Override

Enable Override sender address to use a client-specific sender address. Complete the applicable Sender name, Sender company, address, Phone, and Email fields.

When Override sender address is disabled, saved client sender values are ignored and the complete Baseline Account sender information is used, unless a higher-priority shipment source applies. Sender name and Sender company are optional in the Client Account form.

Specifying Rate Shopping Service Codes

If you use Rate Shopping, restrict the comparison to the Standard, Priority, and Express services enabled for your account and shipment lane.

For detailed instructions on how to configure this, see: Include or exclude Service Codes when Rate Shopping [Step-by-Step Guide].

Label References

ShipEzee supports Reference 1 and Reference 2. Configure them in the Labels group of the Client Account's General tab.

Keep each resolved reference within 30 characters. These configured references are separate from the package identifiers generated by techSHIP.

For a comprehensive guide on how to use label references, see: Using order References in your labels [Step-by-Step guide].

Finalizing the Setup

Once you have entered the required information, click Save.

With the account configured and requirements verified, you can now proceed to process orders as described below.

Configuring an Order

The steps described in this section are not required for carrier setup, and they are offered as an optional review if further order-level configuration is required.

Follow the UI Navigation steps in 📄 05 - How to edit an order’s information - [Step-by-Step guide], using the carrier-specific values provided in this guide.

In the Order's Carrier tab, configure the following ShipEzee fields when needed:

  • Service code: Select the service for the shipment. For a fixed service, use Standard, Priority, or Express as enabled for the account.

  • Insurance: Enable shipment insurance when applicable.

  • Declared value: Enter the amount the shipment should be insured for. This field appears when Insurance is enabled.

  • Signature required: Request the recipient's signature.

  • Adult signature required: Request age verification and a recipient signature.

  • Reason For Export: Enter the export reason for shipment items, overriding the Client Account's Reason for export.

  • Currency: Select the fallback currency for item values when an item does not provide its own currency. This takes precedence over the Client Account's Default currency.

Click Save to apply the order-level changes. After the Order is updated, continue with the standard shipping workflow.

Troubleshooting

  • Authentication fails: In the Baseline Account's Carrier tab, verify that Username contains the correct Client ID, Password contains its Client Secret, and Account ID identifies the intended account. An OAuth invalid_client response indicates that the carrier rejected the credentials.

  • Authentication fails after a period of inactivity: Authentication renewal is automatic. If processing remains blocked, record the returned error, time of failure, and affected Order, and provide them to support for review.

  • A service returns no rate or a carrier error: Check Service code in the Client Account or Order's Carrier tab. Confirm with ShipEzee that the selected service and shipment lane are enabled for the account.

  • Sender address validation fails: Review the Baseline Account's Sender address or the Client Account's enabled Override sender address. Both rating and processing require sender city, country, and postal code; processing also requires the first street-address line. International shipments still require valid sender configuration.

  • Package or item data is rejected: Review each package's weight and dimensions and every item quantity. Use positive measurements and positive whole-number quantities. Include at least one item in each international package.

  • A reference exceeds the carrier limit: Review Reference 1 and Reference 2 in the Client Account's General tab and the Order data used to resolve them. Keep each resulting value within 30 characters.

  • The requested label format is rejected: Select PDF or ZPL under Mode in the Baseline Account's Labels tab.

  • Package charges or currencies are missing or inconsistent: Retain the carrier error and affected shipment details for support review. Changing the Order's Currency does not correct inconsistent charge currencies returned by the carrier.

  • A void fails: Confirm that the processed packages retain their tracking numbers and original carrier account. Review the error for each affected tracking number.

  • A manifest fails or its PDF is unavailable: Review the reported carrier job errors and any jobs already closed. Downloadable PDFs require carrier job information; tracking-only manifests do not return a PDF. Provide the manifest identifier and returned error to support if the issue remains unresolved.