How to configure Stord (STORD) in techSHIP [Guide]
Last updated: October 30, 2026
This guide explains how to add and configure this carrier connection, review its available carrier-specific settings, and understand the shipment requirements and operational constraints that apply.
Carrier Requirements and Specifications
This section summarizes onboarding requirements and lists confirmed carrier-specific constraints.
To review all supported carriers and their specific requirements, see: 📄 techSHIP supported Carriers - Master List [Guides List].
Onboarding Requirements
The Stord integration supports:
Void
Rate Shopping
Time in Transit
Label References
Signature Required —
STORDandSTORDCANADAPOSTAdult Signature Required —
STORDandSTORDCANADAPOSTSender Address Override
Multi-package Shipments
Manifests
Information to be Provided
The following credentials and data points are mandatory to connect to Stord. Ensure you have these items available before starting the setup:
DATA ELEMENT | SOURCE (HOW TO OBTAIN) |
|---|---|
API token | Obtain a Stord API bearer token for the organization being connected. |
Organization ID | Obtain your organization identifier from Stord. |
Shipper ID | Obtain your parcel shipper identifier from Stord. |
Sender information | Provide a valid ship-from address, sender name, and company for the shipments being processed. Configure the address in the Baseline Account and the sender identity in the Client Account, unless an applicable shipment-level source supplies them. |
If you will create manifests, obtain the Shipper facility ID from Stord. Obtain any Fullfilment center ID, Billing account ID, or External Location Id that Stord requires for your account configuration.
Confirm with Stord that the account is enabled for the services, domestic shipment lanes, and signature options you intend to use.
Specifications and Constraints
Operational Details
Stord is a Small Parcel consolidator. The integration provides the main STORD configuration and the Canadian variants STORDCANADAPOST and STORDASENDIA. Use the carrier configuration and service enabled for your account and shipment lane; a Canadian destination does not automatically switch the selected carrier variant.
Keep the parent STORD carrier enabled when using the Canadian variants.
International shipments and Dangerous Goods handling are not supported by this integration.
Time in Transit is available when Stord returns an estimated number of business days in the rate response.
Manifests: Finalization submits the processed parcels to Stord and records the returned manifest identifiers. It does not produce a printable scan form.
Bill of Lading (BOL): This integration does not provide a BOL.
Addresses: Both the resolved sender and destination require a name, first street-address line, city, postal code, and country for rating and shipment processing.
Packages: Include at least one package. Every package requires positive weight, length, width, and height. Weight is sent in pounds and dimensions in inches.
Item data: When item lines are supplied, each quantity must be greater than zero and each unit price must be present and nonnegative.
Multi-package rates: A service is returned for the complete shipment only when it has a valid rate for every package.
Service eligibility: Availability depends on the account and shipment lane. Confirm eligible postal codes and account configuration with Stord before relying on Economy saver.
Configuring a Baseline Account
A Baseline Account serves as the fundamental connection point between techSHIP and the carrier's system. It acts as a template that holds the credentials and fundamental properties required to process shipments.
The techSHIP AI Assistant is available from the Carrier page for supported Carrier configuration tasks. For detailed conceptual information and advanced configuration, refer to 📄 techSHIP AI Assistant: Overview & Availability [Information].
Adding a Carrier
Before adding an account, you must ensure the Carrier entity is available for your location.
Click My Carriers from the left menu under the Carriers category.
Click Add Carrier.

Select the desired Carrier.
You may encounter additional messages depending on the carrier status or your plan:
Subscription Required (⭐): If the carrier has a star icon, you will see a message stating "To use this carrier, a subscription upgrade is required." Press Contact to Upgrade to proceed.

Carrier Suspended: If the carrier has not been used for an extended period, you will see a message stating “This carrier is currently on hold...” Click Request Assistance to reactivate it.

Setup Fee Waived: If a carrier from the same carrier group is already installed in your location, you can add this carrier without incurring additional fees.

If needed, update the carrier Name.
Click Add Carrier.

If the purchase confirmation appears, complete the following steps:
Review the purchase notice and any applicable charge information.
Optionally enter a PO Number.
Select I am authorized to complete this purchase on behalf of my organization.
Click Purchase to confirm the Carrier addition.

Once the Carrier is added, you will be automatically redirected to the Carrier page to continue setting it up.
Enter the Code of the Carrier as it appears in your host system.
The Code of the Carrier must match exactly the value defined in the host system. Any discrepancy (including casing or extra spaces) may prevent the carrier from working correctly.
Click Save.

If your facility utilizes the centralized Pickup Schedule, we highly recommend adding this new carrier to your calendar now. While not required to process labels, this ensures accurate induction metrics for your Insights dashboards. To learn more, see 📄 Understanding the Centralized Pickup Schedule & Expected Induction Logic [Information].
Adding a Baseline Account
From the Carrier page, click Add Account to create a new Baseline Account.

You will be redirected to the Baseline Account page to complete the setup.
Entering incorrect values will prevent the system from generating shipping labels.
General Tab
In the General tab, define the administrative properties:

Name: Enter a descriptive name for the account.
Enter a descriptive name based on unique properties. E.g.:
Carrier Name - Account Number (CarrierX - 123456789)
Carrier Name - Consolidator Name (CarrierY - MyConsolidator)
Carrier Name
Usage: Select the most suitable option:
Test: Used for sandbox or onboarding purposes.
Production: Used for live shipping.
Keep the Status field set to its default Active value. An account must be Active to remain fully editable. For detailed conceptual information on account statuses, refer to 📄 How to Inactivate and Activate a Carrier Baseline Account [Step-by-Step Guide].
Carrier Tab
Credentials and Account Identifiers
API token: Enter the required Stord bearer token. This field uses a masked password control.
Organization ID: Enter the required Stord organization identifier.
Shipper ID: Enter the required parcel shipper identifier.
Shipper facility ID: Enter the facility identifier used for manifesting. The field's hint is “Required for manifesting.”
Fullfilment center ID: Optionally enter the Stord fulfillment center identifier. When supplied, the resolved ship-from address must match the address registered to that center.
Billing account ID: Optionally enter the Stord billing account identifier to assign it to created shipments.
Sender Address
Under Sender address, configure Address 1, City, Zip, and Country. Complete State/province as applicable, and use Address 2 and Address 3 when needed.
This provides the default sender street address when no applicable client or shipment override takes precedence. Configure the sender name and company in the Client Account as described below.
External Location Id: Optionally enter the identifier of the Stord location associated with the sender address.
Labels Tab
Set Mode to PDF or ZPL for native carrier labels. A label is returned for each successfully created package.
PNG output: techSHIP can convert the returned ZPL label to an image for PNG output; Stord does not return a native PNG label.
Finalizing the Setup
Once you have entered the required information, click Save.

After you save the Baseline Account, check whether the Registration tab or a registration status badge is available.

If neither is available, the Carrier does not use this Registration workflow in techSHIP. If registration is still pending, open the Registration tab and press Registration, then complete 📄 How to Register a Carrier Baseline Account [Step-by-Step Guide] before creating shipments.
From the Carrier page, you can now see the Baseline Account listed with the administrative status Active. The Active status is separate from the account's registration status.

The Baseline Account configuration is now saved. You can continue with Configuring a Client Account below to assign the Baseline Account to a specific Client.
Configuring a Client Account
Adding an Account
Before adding a Client Account, ensure that the Client has been created. For instructions creating a Client, see: 📄 10 - How to create a Client profile [Step-by-Step guide].
Click Clients from the left menu under the Clients section.
Click the Edit icon for the desired Client.

Click Add Accounts.

Optionally, use the Search box to search by Baseline Account Name or Carrier.
Select the Baseline Accounts that will serve as the foundation for your new Client Accounts.
Click Add Accounts.

A toast notification will confirm the accounts were successfully assigned. Click the Refresh icon if recently added accounts are not displayed.

Click Edit on each newly created account.

Configure the available options in each tab (except Carrier).

For complete instructions on configuring this settings, see 📄 How to configure the Billing Account General Options tab [Step-by-Step guide].
Carrier Tab
Service and Package Settings
Service code: Select the service for this client, or use [Use Order] to take the service from the Order. Shipment creation requires a resolved service.
Package type: Select Box or Envelope. If you select [Mapped box name], configure each box name's corresponding carrier package type. Each package uses its own mapped type when available, with the order-level resolved type as the fallback.
Override WMS Service Code: Enable this option to use the configured client service instead of the service supplied by the Integrated system.
Adult Signature Required: For
STORDandSTORDCANADAPOST, select Default, Enable, or Disable to set the client preference used during rating. Review the Order's signature settings before processing. This control is unavailable forSTORDASENDIA.Use contracted rates: Enable for a faster estimate based on contracted rates. Disable to request full live rating.
Sender Identity and Address Override
Complete Sender name and Sender company. These identify the sender even when the street address is inherited from the Baseline Account, unless the shipment supplies its own ship-from information.
Enable Override sender address when this client needs a different ship-from address. Complete Address 1, City, Zip, and Country; add State/province, Address 2, and Address 3 as applicable. Complete Phone and Email when needed.
When Override sender address is disabled, the street address normally comes from the Baseline Account. The client sender identity can still apply.
Specifying Rate Shopping Service Codes
If you use Rate Shopping, restrict the comparison to services enabled for the selected Stord carrier variant, account, and shipment lane.
For detailed instructions on how to configure this, see: Include or exclude Service Codes when Rate Shopping [Step-by-Step Guide].
Label References
Stord supports Reference 1, Reference 2, and Reference 3. Configure them in the Labels group of the Client Account's General tab.
For a comprehensive guide on how to use label references, see: Using order References in your labels [Step-by-Step guide].
Finalizing the Setup
Once you have entered the required information, click Save.

With the account configured and requirements verified, you can now proceed to process orders as described below.
Configuring an Order
The steps described in this section are not required for carrier setup, and they are offered as an optional review if further order-level configuration is required.
Follow the UI Navigation steps in 📄 05 - How to edit an order’s information - [Step-by-Step guide], using the carrier-specific values provided in this guide.
In the Order's Carrier tab, configure the following Stord fields when needed:
Service code: Select the service for this shipment.
Residential: Select Default, Enable, or Disable to set the destination's residential condition.
Signature Required: Request a standard signature for
STORDorSTORDCANADAPOST.Adult Signature Required: Request an adult signature for
STORDorSTORDCANADAPOST. Adult signature takes precedence when both signature options are enabled.
The signature controls are unavailable for STORDASENDIA.
Click Save to apply the order-level changes. After the Order is updated, continue with the standard shipping workflow.
Troubleshooting
Authentication or account access fails: Verify API token, Organization ID, and Shipper ID in the Baseline Account's Carrier tab. Confirm with Stord that they belong to the intended account and environment.
Origin address mismatch: Review Fullfilment center ID in the Baseline Account and the sender address actually used by the shipment. If the identifier is supplied, the address must match the fulfillment center's registered address. Correct the address or confirm the appropriate center with Stord.
A service is missing or returns no rate: Check Service code, the selected carrier variant, and the account's lane eligibility. For multiple packages, the same service must return a valid rate for every package. Confirm Economy saver eligibility with Stord if that service is required.
Sender or destination validation fails: Check that both addresses include a name, first street-address line, city, postal code, and country. For the sender, review the Client Account's Sender name, inherited Baseline address, enabled Override sender address, and any shipment-level ship-from information.
A box name is not mapped: If Package type is [Mapped box name], verify that every package has a box name and that its carrier package-type mapping exists.
Package or item data is rejected: Check positive package weight and dimensions. For supplied item lines, enter a positive quantity and a nonnegative unit price.
A signature request fails: Confirm that the account and service support the requested signature option. Use
STORDorSTORDCANADAPOSTfor signature requests;STORDASENDIAdoes not support them.A label is missing or its format is rejected: Check Mode in the Baseline Account's Labels tab and retain the package-specific carrier error. Before processing again, review whether Stord already created the parcel.
Processing fails after some packages were created: Review the status of each package and reconcile the created parcels before retrying. Retain returned parcel identifiers and any cleanup or void results for support review.
A void fails: Confirm that the shipment retains its original Stord parcel identifier and carrier account. Provide the affected shipment and returned carrier error to support.
Manifest finalization fails: Check Shipper facility ID and the affected parcels' fulfillment center information. Preserve any already-created manifest identifiers. Reconcile the failed requests with Stord before retrying so existing manifests are not recreated.